Adhesive Wall Mount for Eufy Security Cameras: Installation Guide
By Brainwavz Audio | Published: 2026-10-20
Category: How-to Guides
Learn how to install the Brainwavz adhesive wall mount for Eufy Solo C24 and C120 cameras. Step-by-step guide with tips for a secure, no-drill setup.
Quick answer
The Brainwavz adhesive wall mount lets you attach your Eufy Solo C24 or C120 camera to any smooth vertical surface without drilling. Follow these steps for a secure, lasting installation.
Why choose an adhesive mount over drilling?
Adhesive mounts are ideal for renters or anyone who wants to avoid permanent wall damage. The Brainwavz mount uses strong 3M adhesive that bonds to clean, smooth surfaces like painted drywall, tile, or glass. Keep in mind that adhesive mounts are not recommended for textured walls, wallpaper, or outdoor use where moisture and temperature swings can weaken the bond.
If you prefer a more permanent solution, the same mount also includes screw holes for traditional installation. The choice depends on your wall type and whether you need to relocate the camera later.
Step-by-step installation
- Choose the mounting location: Select a smooth, clean, dry vertical surface within reach of a power outlet. Avoid textured walls, wallpaper, or areas near heat vents. The camera needs a clear view of the area you want to monitor. A common mistake is placing the mount on a textured or dusty surface, which prevents the adhesive from bonding fully.
- Clean the surface thoroughly: Wipe the area with isopropyl alcohol and a lint-free cloth. Remove all dust, grease, and residue. Let the surface dry completely for at least 10 minutes. Skipping this step is the top reason adhesive mounts fail. Even invisible oils from your fingers can reduce adhesion.
- Peel and apply the adhesive pad: Remove the backing from the 3M adhesive pad on the mount bracket. Press the bracket firmly against the wall for 30 seconds, applying even pressure across the entire surface. Hold it in place without shifting. Do not reposition the mount after it touches the wall. The adhesive bonds instantly and will not re-stick well.
- Attach the camera to the mount: Align the Eufy Solo C24 or C120 camera base with the mount bracket. Twist or snap it into place until you hear a click. Adjust the camera angle by tilting the bracket head. Make sure the camera is securely locked before letting go. A loose camera can fall and damage the lens.
- Let the adhesive cure: Wait at least 24 hours before applying any force or adjusting the camera angle. The adhesive reaches full strength after 72 hours. During this time, avoid bumping the mount or hanging anything on it. Many people assume the mount is ready immediately. Full cure time is essential for maximum hold, especially in warmer rooms.
Product used in this guide
- 2 Pack Adhesive Wall Mount For Eufy Solo C24 / C120 (T8400X) Security Camera, Stick On & Screw In: Mounting bracket suitable for Eufy Solo IndoorCam C24 / C120 (T8400X) Wi-Fi Camera, easy install, screw or stick-on. You get two mounting options in one product, so you can choose adhesive for a no-drill setup or screws for maximum hold.
2 Pack Adhesive Wall Mount For Eufy Solo C24 / C120 (T8400X) Security Camera, Stick On & Screw In
