Audeze Maxwell Gen 1 Earpads: Replacement Fit and Care
By Brainwavz Audio | Published: 2026-10-31
Category: Tips & Care
Learn how to replace and care for Audeze Maxwell Gen 1 earpads with angled PU leather and memory foam. Step-by-step fit checks and cleaning tips inside.
Quick answer
Replace your Audeze Maxwell Gen 1 earpads when the foam flattens or the PU leather cracks, using pads specifically made for Gen 1. Clean them monthly with a dry microfiber cloth and avoid soaking the foam.
Why Gen 1 compatibility matters
Audeze Maxwell Gen 1 and Maxwell 2 use different earpad mounts, so pads designed for one won't fit the other. The Brainwavz replacement pads are explicitly made for Maxwell Gen 1 only; they will not fit Maxwell 2 or other brands. Check your headset model before ordering—if you have Maxwell 2, these pads are not compatible.
When to replace instead of clean
Clean your pads first if they are just dusty or slightly oily. Replace them when the memory foam no longer springs back after squeezing, when the PU leather surface is cracked or peeling, or when the pads no longer seal against your head. Angled pads can help if you want a different fit or more space inside the cup, but they won't fix a broken headband or driver issue.
Step-by-step: replace and care for your earpads
- Remove the old pads: Gently peel the old earpad away from the cup, starting at one edge and working around. Do not use sharp tools that could scratch the housing. Check for any adhesive residue or torn foam left on the cup before installing new pads.
- Clean the mounting surface: Wipe the cup rim with a dry microfiber cloth to remove dust or oil. Let it dry completely before attaching new pads. A clean surface helps the new pad sit flush and reduces slipping.
- Align and press the new pad: Match the angled side of the pad to the front of the cup (the thinner side usually faces forward). Press firmly around the entire edge until the pad is seated evenly. Run your finger around the seam to feel for gaps or loose spots; reseat if needed.
- Test the fit and seal: Put the headset on and adjust the headband. The pad should seal gently around your ear without pressing too hard. If the seal feels uneven, remove and reinstall. A proper seal improves bass and isolation; if sound is thin, check that the pad is fully clicked in.
- Clean PU leather monthly: Wipe the outer surface with a dry microfiber cloth. For smudges, use a slightly damp cloth with plain water, then dry immediately. Never soak the foam or use alcohol-based cleaners. Avoid harsh chemicals—they can dry out and crack the PU leather over time.
- Store to protect the foam: Keep the headset on a stand or in a case when not in use. Avoid leaving it in direct sunlight or near heat sources, which can degrade the foam and leather. Replace pads when the foam stays compressed after squeezing or the surface cracks—typically every 12–18 months with regular use.
Product facts
- Replacement Angled Earpads for Audeze Maxwell (GEN 1) Headsets Soft PU Leather with High Grade Memory Foam: Soft PU leather surface with high-grade memory foam, designed for Audeze Maxwell Gen 1 only. The soft cover feels gentle on skin, while the memory foam aims to keep its shape longer than basic foam.
Replacement Angled Earpads for Audeze Maxwell (GEN 1) Headsets Soft PU Leather with High Grade Memory Foam
