Eufy E220 Corner Mount: Reduce Blind Spots at Home

By Brainwavz Audio | Published: 2026-10-28

Category: How-to Guides

Learn how to mount your Eufy E220 or S220 camera in a corner to reduce blind spots and keep your space clutter-free with the Corner Wall Mount.

Quick Answer

Mounting your Eufy E220 or S220 in a corner with the Corner Wall Mount reduces blind spots and keeps the camera out of high-traffic areas. Follow the steps below to install it securely with either adhesive or screws.

Why a Corner Mount Reduces Blind Spots

A corner position gives your Eufy E220 or S220 a wider field of view than a flat wall mount. Instead of pointing straight ahead, the camera can see two walls and the center of the room, which cuts down on hidden areas where motion might go unnoticed.

Corners are also less likely to be bumped or blocked by furniture, so the camera stays put and keeps a consistent view. This is especially useful in living rooms, nurseries, or home offices where you want broad coverage without a camera in the middle of the wall.

Adhesive vs. Screw Mounting: Which to Choose

The Corner Wall Mount includes 3M VHB adhesive for a drill-free install, which works well on smooth, clean surfaces like painted drywall, glass, or tile. If you need a temporary setup or rent your home, adhesive is the faster and less invasive option.

For long-term reliability on textured walls or in humid areas, screws provide a stronger hold. The mount supports both methods, so you can choose based on your wall type and how permanent you want the installation to be.

Keep in mind that adhesive may not stick well to wallpaper or rough surfaces, and removing it later can leave residue. Screws require drilling, but they’ll hold firmly in almost any condition.

Step-by-Step Installation Guide

Choose the Mounting Spot: Select a corner that gives you the best view of the room. Make sure the surface is clean and dry, and that the camera's field of view isn't blocked by shelves, curtains, or furniture. Check that the corner is within reach of a power outlet or that your camera's cord can reach safely.
Prepare the Surface: Wipe the corner area with a mild cleaner to remove dust and grease. Let it dry completely before applying the adhesive. For screw mounting, mark the hole positions and drill pilot holes if needed. Skipping this step can cause the adhesive to fail or screws to strip.
Attach the Mounting Bracket: Peel the backing off the 3M VHB adhesive and press the bracket firmly against the corner. Hold it in place for 30 seconds to ensure good contact. If you're using screws, align the bracket and tighten the screws securely. For adhesive, wait at least an hour before attaching the camera to allow the bond to strengthen.
Secure the Camera: Place your Eufy E220 or S220 into the base and use the included ¼-inch mounting bolt to lock it in place. Make sure the camera sits flush and doesn't wobble. Tighten the bolt just enough to hold the camera firmly—over-tightening can strip the threads.
Adjust the View and Test: Tilt and rotate the camera to your desired angle, then open the Eufy app to check the live view. Confirm that the area you want to monitor is fully visible and that there are no blind spots. Walk through the room to verify motion detection covers the space you expect.

Recommended Product

Corner Wall Mount for Eufy E220 / S220 (T8410X), 3M VHB Adhesive Security Camera Holder Bracket, Reduce Blind Spots & Clutter, Adhesive & Screw-In Mounting - Easy to Install (White): This mounting bracket is designed for the S220 T8410X (IndoorCam E220 / S220) and lets you mount your camera in the corner of any room for better viewing angles. It helps you reduce blind spots by positioning the camera to see more of the room, while keeping it out of the way and less likely to be knocked or moved.
Corner Wall Mount for Eufy E220 / S220 (T8410X), 3M VHB Adhesive Security Camera Holder Bracket, Reduce Blind Spots & Clutter, Adhesive & Screw-In Mounting - Easy to Install (White)