Why a custom mount matters for your Wansview Dome Q5
If your Wansview Dome Q5 camera sits on a shelf or table, it likely misses large areas of the room. A dedicated wall mount lets you position the camera in a corner or high on a wall, which immediately widens the field of view and reduces blind spots. The Brainwavz Wall Mount Holder is custom-designed for the Q5, so the camera drops in securely without wobbling or needing adapters.
What the mount offers
- Wall Mount Holder For Wansview Dome Q5 Smart Security Camera, Custom Designed Bracket, Reduce Blind Spots & Clutter: Custom designed for the Wansview Dome Q5 camera. No guesswork about fit – the camera sits snugly and won't shift out of position.

Wall Mount Holder For Wansview Dome Q5 Smart Security Camera, Custom Designed Bracket, Reduce Blind Spots & Clutter - Wall Mount Holder For Wansview Dome Q5 Smart Security Camera, Custom Designed Bracket, Reduce Blind Spots & Clutter: Includes both screw-mount hardware and 3M VHB adhesive tape. You can choose the installation method that suits your wall type and preference.
- Wall Mount Holder For Wansview Dome Q5 Smart Security Camera, Custom Designed Bracket, Reduce Blind Spots & Clutter: The power cord exits through a rear access hole, keeping the cable tidy. A clean cable path prevents the cord from pulling on the camera or creating a tripping hazard.
Screw mount vs. adhesive mount – which to choose
The bracket supports two installation methods, and the right choice depends on your wall surface. The screw-mount option uses the included screws, wall plugs, washers, and screw caps. It's the more permanent solution and works on wood or solid walls where you can drill.
The adhesive option uses 3M VHB tape – just peel the red backing, press the bracket into place, and let it set for a few hours. However, the supplied instructions warn not to use the adhesive on painted, damp, or plastered walls, as those surfaces won't hold the tape reliably. If your wall is painted or textured, choose the screw mount or test the adhesive on a small hidden area first.
Placement tips for fewer blind spots
Mount the camera in a corner to cover two walls at once, or place it high on a wall to look down over a room. The bracket's corner-friendly design keeps the camera out of walkways and reduces the chance it gets bumped or moved. Because the mount holds the camera securely, you can aim the lens exactly where you need it without worrying about it drifting over time.
What to keep in mind
The mount is specifically for the Wansview Dome Q5 – it won't fit other camera models. The supplied evidence does not include a maximum load rating or temperature range, so if your camera will be in an unusually hot or cold location, check the camera's own specs before mounting. The adhesive tape requires a clean, dry, non-painted surface for best results; if you're unsure about your wall, the screw mount is the more reliable option.


