Back to Blog
How-to Guides 2026-11-18 Brainwavz Audio 0 views

Caldigit TS4 Under-Desk Mount: Install and Placement Tips

Caldigit TS4 Under-Desk Mount: Install and Placement Tips

A practical guide to mounting your Caldigit TS4 dock under the desk with the Brainwavz bracket, covering adhesive vs screw mounting, surface prep, and placement checks.

Start with the right bracket for your TS4

If you want to free up desk space and keep your Caldigit TS4 Thunderbolt 4 Dock within easy reach, an under-desk mount is a sensible upgrade. The Brainwavz Under Desk Mounting Bracket is custom designed for the Caldigit TS4, so it fits the dock precisely while leaving all front and back connectors accessible. That means you can still plug in your devices without removing the dock from the bracket.

The bracket also leaves room for airflow to help keep the dock cool during use. Before you commit to a mounting method, check that your desk surface and setup will work with either the adhesive or screw option.

What the Brainwavz bracket is designed for

Adhesive vs screw mounting: which should you choose?

The bracket gives you two mounting paths: a self-adhesive option using 3M VHB tape, or a screw-mount option for walls and wood surfaces. The adhesive route requires no tools and is quick to install, but it is only as strong as the surface it sticks to. The screw route is more permanent and works well if you don't mind driving a few screws into your desk or wall.

A key limitation from the product information: do not place the adhesive mount on painted, damp, or plastered walls. These surfaces are not suitable for adhesive mounting. If your desk underside is painted or has a textured finish, the screw option is the safer choice.

How to install the bracket with adhesive tape

If you choose the adhesive method, follow these steps for a secure hold.

  1. Clean and dry the surface: Wipe the underside of your desk or wall with a clean cloth to remove dust and grease. Make sure the area is completely dry before applying the tape.
  2. Peel off the red backing: Remove the red backing from the 3M VHB tape on the bracket.
  3. Press firmly into place: Stick the bracket in your desired location and press down firmly to ensure good contact.
  4. Let it set: Allow the adhesive to set for a few hours before mounting the dock. The product information says to let it set for a few hours, so plan accordingly.

How to install the bracket with screws

For a more permanent hold on wood or walls, use the included screw pack.

  1. Mark your drill points: Hold the bracket in place and mark the screw holes with a pencil.
  2. Drill pilot holes if needed: For wood, a pilot hole can help prevent splitting. Use a drill bit slightly smaller than the screws.
  3. Secure the bracket: Drive the screws through the bracket into the surface. Use the wall plugs if mounting into drywall or masonry.
  4. Cover the screws: Press the included screw caps over the screw heads for a clean finish.

Placement tips for airflow and cable access

Where you mount the bracket matters for both cooling and convenience. The bracket is designed to allow airflow around the dock, so avoid enclosing it in a tight cabinet or pressing it against a thick carpet. Leave some space around the vents.

Also think about cable routing. The bracket allows access to all ports, but you'll want enough clearance to plug and unplug cables without straining them. If you frequently connect and disconnect devices, consider mounting the bracket near the front edge of the desk for easier reach.

What the supplied information does not cover

The product record does not specify a maximum weight capacity for the bracket, nor does it provide detailed instructions for every possible desk material. If your desk is made of glass or a fragile material, consult a professional before drilling or adhering. Also, the adhesive's performance can vary with temperature and humidity; the product information only warns against painted, damp, or plastered walls, so use your judgment for other surfaces.

Related Articles

Customer Service
Home
Products
Cart
Profile