Back to Blog
How-to Guides 2026-11-18 Brainwavz Audio 0 views

Tilted Camera Wall Mount: Aim and Install for Fewer Blind Spots

Tilted Camera Wall Mount: Aim and Install for Fewer Blind Spots

Use a tilted camera wall mount to aim a security camera or baby monitor, choose adhesive or screw mounting, and reduce blind spots with a supported install sequence.

Why a tilted mount changes your camera's view

A tilted camera wall mount places the camera at an angle instead of flat against the wall. That angle helps point the lens toward the area you want to watch, which can reduce blind spots compared with a straight-on mount. The Brainwavz Tilted Universal Security Shelf is designed for this: it holds home security cameras, baby monitors and pet cameras from brands like Eufy, Wyze, Wansview, Blink, TP Link, Ring, LaView, Arlo, Google, Kasa, YI, BluRams and Netvue, plus most other home and personal camera systems.

The mount also includes a 1/4" bolt and a mounting slot to lock compatible cameras in place. That matters because a camera that shifts after installation can leave you guessing whether a gap in coverage is a blind spot or just a bumped camera.

What the mount is built to do

Install sequence: adhesive or screw mounting

The mount supports two mounting methods. Choose based on your wall surface and whether you want a tool-free install.

  1. Check your camera fits the mount: Use the dimension chart to confirm your camera's size and mounting thread match the bracket. The 1/4" bolt is included for compatible cameras.
  2. Pick a surface for adhesive mounting: The self-adhesive option uses 3M VHB tape. Do not place it on painted, damp or plastered walls, as these are not suitable surfaces for adhesive mounting. Clean, dry, solid surfaces are the safer choice.
  3. Apply the adhesive mount: Peel off the red backing from the 3M VHB tape and stick the mount in the desired location. Let it set for a few hours before mounting the camera.
  4. Or screw the mount into wall or wood: All hardware is included: screws, washers, wall plugs and screw caps. Use the screw option for walls where adhesive is not suitable.
  5. Secure the camera: Place the camera into the slot and use the 1/4" bolt to lock it down. Make sure it cannot move or be knocked out of position.

Aiming the camera to reduce blind spots

The tilted design helps provide better coverage and reduce blind spots, but the exact angle depends on your room and camera. Before final tightening, point the camera toward the area you most want to monitor—such as a doorway, crib or pet bed—and check the live view on your phone. Adjust the tilt until the view covers the gap you are trying to close. Because the mount is angled, it can also keep the camera out of the way of accidental knocks, which helps maintain that view over time.

For baby monitor use, the mount is intended to hold the camera securely, but it does not change the camera's own features. Always follow your baby monitor's instructions for safe placement and cord management. The supplied information does not specify age or size ranges for baby monitors, so check your monitor's manual for any placement limits.

Adhesive vs screw mounting: which to choose

Both options are included, but they suit different situations.

  • Adhesive mount: Tool-free and quick. Best for smooth, solid surfaces that are not painted, damp or plastered. Let it set for a few hours before use.
  • Screw mount: More permanent and suitable for walls and wood surfaces. Includes screws, washers, wall plugs and screw caps. Requires tools and drilling.

Placement checks before you commit

Before mounting, test the camera's view from the intended spot. Hold the mount in place (without sticking or screwing) and check the live feed for the coverage you need. Confirm the surface is suitable for adhesive if you plan to use tape, and remember that painted, damp or plastered walls are not suitable for adhesive mounting. If your wall is one of those, use the screw option.

Also check that the camera's power cable can reach the location, and that the mount will not interfere with nearby furniture or traffic. The tilted design helps with aiming, but it does not extend cable length or change your camera's power requirements.

Product facts that affect your install

Related Articles

Customer Service
Home
Products
Cart
Profile