Eero Mesh WiFi Wall Mount: No Screws Installation Guide

By Brainwavz Audio | Published: 2026-10-29

Category: How-to Guides

Learn how to install your Eero Mesh WiFi wall mount without screws or tools using 3M VHB tape. Step-by-step guide for a clean, no-mess setup.

Quick answer

Use the Eero Mesh WiFi Wall Mount Holder with pre-applied 3M VHB tape to mount your Eero on the wall without screws, tools, or mess — just clean, position, and press.

Why mount your Eero on the wall?

Placing your Eero on a low table or shelf can limit its WiFi range because the signal radiates outward and upward. Mounting it higher on a wall helps the mesh system reach more areas of your home, improving coverage and performance without moving furniture.

Adhesive vs screw mounting: what to consider

The adhesive method using 3M VHB tape is ideal for renters, tiled walls, or anyone who wants a clean installation without drilling holes. It holds firmly on smooth, clean surfaces like painted drywall, glass, or metal. However, it is not recommended for textured walls, wallpaper, or surfaces that get hot or damp — in those cases, a screw-in mount may be more reliable.

Step-by-step installation

1. Choose the right wall location: Select a spot on a smooth, clean wall surface about 4–6 feet high. Avoid textured wallpaper, brick, or areas near heat sources. The mount works best on painted drywall, glass, or metal. A textured or dusty surface will reduce adhesive grip — wipe the area with isopropyl alcohol first.
2. Clean the wall surface: Use a lint-free cloth and rubbing alcohol to remove dust, grease, or residue. Let the area dry completely for 30 seconds. This step is critical for the 3M VHB tape to bond properly. Skipping this step is the most common cause of mounts falling off after a few days.
3. Peel and position the mount: Remove the backing from the 3M VHB tape on the back of the mount. Press the mount firmly against the wall for 30 seconds, applying even pressure across the entire surface. Do not reposition the mount once it touches the wall — the tape bonds instantly and may lose adhesion if peeled off.
4. Attach your Eero to the mount: Slide your Eero into the holder until it clicks or sits flush. Ensure the cables are not pinched and the ventilation holes (if any) remain uncovered. Leave the mount undisturbed for 24 hours before attaching the Eero to allow the adhesive to reach full strength.
5. Check the fit and cable management: Route the power cable neatly along the wall or use cable clips to keep it tidy. Confirm the Eero is stable and not wobbling. If the mount feels loose after 24 hours, the surface may not be compatible — consider a screw-in alternative.

Product used in this guide

Eero Mesh WIFI Wall Mount Holder (02) - Easy To Install, No Screws and Mess (Not Compatible with Eero 6/Pro/Pro 6/Beacon): Uses 3M VHB tape for tool-free installation — no screws or drilling required. You can mount your Eero securely in minutes without damaging walls, making it perfect for apartments or temporary setups.
Eero Mesh WIFI Wall Mount Holder (02) - Easy To Install, No Screws and Mess (Not Compatible with Eero 6/Pro/Pro 6/Beacon)