UGC-X 2-Pack Controller Wall Mount: Install for Xbox and PS5

By Brainwavz Audio | Published: 2026-11-01

Category: How-to Guides

A step-by-step guide to installing the UGC-X 2-Pack Universal Game Controller Wall Mount for Xbox and PS5 controllers, with checkpoints to avoid common mistakes.

Quick answer

Mount the UGC-X 2-Pack Universal Game Controller Wall Mount by first test-fitting each controller, then securing the holder to a solid surface using the included hardware or strong adhesive, and finally checking stability before regular use.

Why the UGC-X 2-Pack suits Xbox and PS5 controllers

The UGC-X is designed as a universal holder, with a strong plastic build and a solid base that fits the profile of many controllers. This makes it a practical choice when you want one mount style for both Xbox and PS5 pads, rather than buying separate holders. Because it is a 2-pack, you can set up two controllers side by side or in different rooms without ordering twice.

Choose the right spot before you commit

Pick a wall area that is out of direct sunlight and away from heat sources, as prolonged exposure can affect plastics and adhesives over time. Make sure the surface is smooth, clean, and structurally sound—drywall with weak paint or wallpaper may not hold an adhesive mount well. If you are unsure about the wall's internal structure, use the screw method instead of adhesive.

Installation steps for the UGC-X 2-Pack

Test-fit each controller: Before mounting, place your Xbox and PS5 controllers into the holder to confirm they sit securely and the charging port or cable access is not blocked. Common mistake: assuming all controllers fit identically—check each one individually. If a controller feels loose, check for any removable inserts or adjust the angle of the holder before mounting.
Mark and prepare the wall: Hold the mount against the wall at your desired height and mark the screw holes with a pencil. For adhesive mounting, clean the area with isopropyl alcohol and let it dry completely. Common mistake: skipping the cleaning step, which weakens adhesive grip. Use a level to ensure both mounts sit at the same height if you are installing the pair side by side.
Secure the mount: For screw mounting, drill pilot holes and drive the screws through the mount into a stud or use appropriate wall anchors. For adhesive mounting, peel the backing and press firmly for 30 seconds, then wait 24 hours before adding controllers. Common mistake: hanging controllers immediately after adhesive application. If using adhesive, avoid hanging controllers for a full day to let the bond cure.
Check stability and cable routing: Once mounted, gently pull down on the holder to test security. Place controllers in the mounts and route charging cables so they are not strained. Common mistake: forcing a controller into the holder, which can scratch the finish or stress the mount. Confirm the mount does not wobble; if it does, tighten screws or consider relocating to a more solid surface.

Product facts

UGC-X (2 Pack) Universal Game Controller Wall Mount - For Xbox, PS5/PS4, PC & More: Universal design works with Xbox One, Xbox 360, PS5/PS4, PS3, Nintendo Switch, Steam Controller, and many third-party gamepads. You can use the same mount for multiple console generations and controller types without buying separate holders.
UGC-X (2 Pack) Universal Game Controller Wall Mount - For Xbox, PS5/PS4, PC & More
UGC-X (2 Pack) Universal Game Controller Wall Mount - For Xbox, PS5/PS4, PC & More: Manufactured from high-strength plastic with a solid base that fits the controller profile. The holder is built to resist bending and flexing, which helps keep controllers secure during daily use.